Šuplík pod transportní vůz
IMI Trailer Drawer for storing of equipment available now as retrofit kit for all modern or older sailplane trailers. One man rigging system, Tow bar, Wing supports or other equipment can be stored and transported in the lockable splash-water and… více
IMI Trailer Drawer for storing of equipment available now as retrofit kit for all modern or older sailplane trailers. One man rigging system, Tow bar, Wing supports or other equipment can be stored and transported in the lockable splash-water and dustproof drawer which is attached behind the axle of the trailer close to the center of gravity. The drawer improves significantly the storing possibilities of every trailer. We also offer proffessional installation in our workshop close to Prague, Czech Republic.
The drawer is bolted to the trailer by solid and robust aluminium frame with solid double ball-bearing telescopic rails. The fiberglass drawer itself is completelly sealed by Pirelli rubber profiles against moisture, splashwater and dust. The drawer comes almost completelly out the telescopic rails while opened (75cm move), what makes loading and unloading of the stored equipment very comfortable. The drawer with frame is bolted to the bottom of the trailer (sandwich plate/foam botton or profile frame bottom) by 9pcs of M10/70 or M10/90 bolts. Attachment close to the axle of the trailer ensures neglectable change in the center of gravity of the trailer, the up-swept rear edge ensures sufficient clearence of about 15cm above ground (what is similar to clearence of common cars). Maximum weight of stored equipment in the drawer: 32kg, max permitted speed 100km/h.
We deliver the drawer as a complete and assembled retrofit kit, which includes:
- Complete assembled and sealed drawer with aluminium frame and telescopic rails
- All necessary bolts, washers and nuts for attachment to the trailer, bushings for sandwich bottom (Cobra trailer)
- Counterplate for lock (incl. blind rivets, to be riveted to the bottom in a proper place)
- Cartridge of black Mammut glue for sealing the connection drawer frame to bottom of the trailer
- 2pcs of keys for the lock
- User manual with installation and maintenance instructions
Parameters:
Internal dimensions | Width: 110 cm | Depth: 82 cm | Height: 20 cm |
External dimensions incl. frame | Width: 137 cm | Depth: 103 cm | Height: 22 cm |
Weight of the complete kit | 26 kg | ||
Max. permitted load | 32 kg | ||
Max. permitted speed with drawer | 100 kmh |
Compatible trailers:
- Cobra trailers
- Anschau Komet trailers
- Swan trailers
- most of Pfeiffer, Schroeder and similar trailers
- for another producers or homebuilt trailers please contact us with photos and dimensions to check the compatibility. The depth and height of the drawer is designed to fit to any trailer which is at least 108cm wide at the bottom.
Discalaimer:
The IMI Trailer Drawer was tested intensivelly installed to the Cobra trailer in different conditions (speed up to 140kmh) and proved to be solid and safe for use. The installation to the trailer and use on the public roads is at own risk of the owner/operator of the trailer and we don´t take any response for potentional damage or injuries caused by use of the device. Use of damaged, unlocked, overloaded or improperly installed drawer could be dangerous. Allways check whether the drawer is locked and not damaged before the drive with the trailer. Do not drive with the trailer with damaged or unlockable drawer (contact us in such case or remove the drawer from the aluminium frame).