The Power Supply with datatransfer enables you to power the PDA device by 5V voltage directly from the 12V board power net and to connect the PDA with another instrument (flight recorder, variometer, FLARM). It is intended for PDA devices, which don´t have integrated GPS or additional GPS module and have to be connected to the source of GPS data.

The design is high efficiency swithcing technology, which ensures the maximal battery life. The tiny convereter body is made of aluminium sheet. It is equipped with two mounts for screws, fuse case (1,5A fuse), red LED indicating the operation, 2m feed cable and two connectors - one for the PDA datacable (RJ-12) and one for the flight recorder or another instrument (RJ-45). Both PDA datacable and flight recorder datacable are included in this product. 

The installation is very easy - you just plug the feed cable into the board net and connect the PDA with power supply by the PDA cable and the flight recorder with power supply by the second cable. It is not possible to mismatch the cables by mistake, the connectors are different.  We recommend to add one more 1,5A fast fuse in front of the feed cable. 

Typical connection

Our standard offer includes iPAQ PDA cable with 12pin connector (iPAQ 31xx, 36xx, 37xx), iPAQ PDA cable with 22pin connector (iPAQ 38xx and almost all latter models), FS Loox PDA 26pin connector (FS Loox n410, n420, n520, n560, n600, n620, n720 and compatible), mini-USB 5pin connector with data connection (HP PNA iPAQ314 and compatible), mini-USB 5pin connector for powering only (no data connection) and flight recorder cables for all common IGC approved flight recorders - RJ-12 (Colibri, LX-20 2000), RJ-45 (Volkslogger, Erixx), DSUB-9 (LX-20, LX21), DSUB-15 (FLARM ECW100).

Supported handhelds, PDA, PNA devices

List of supported iPAQ PDA devices with 22-pin connector:
HP iPAQ h1910, h1915, h1920, h1930, h1935, h1937, h1940, h1945, h2210, h2215, h3830, h3835, h3850, h3870, h3875, h3950, h3955, h3970, h3975, h4140, h4150, h4350, h4355, h5150, h5155, h5450, h5455, h5550, h5555, hw6510, hw6515, hw6910, hw6915, hw6925, hw6940, hw6965, hx2190, hx2490, hx2495, hx2750, hx2790, hx2795, hx4700, hx4705, hx4710, rx1950, rx1955, rx3110, rx3115, rx3415, rx3417, rx3710, rx3715, rz1710, rz1715

List of supported Fujitsu Siemens LOOX PDA devices with 26-pin connector:
FS LOOX n410, n420, n520, n560, n600, n620, n720 and compatible

List of supported devices with 5-pin mini-USB connector - type IPQ
HP iPAQ 314 (COM3) and compatible
Medion MD96710 (COM2)
MIO A201, A701, C210, C220, C250, C310, C510, C710,  M201, M180, M169, M400, P350 (COM1), P360, P550 (COM1)
Dynavix Nano
Falk E30, E60, N30, N40, N80, N100, N120, N150, N200
Yakumo Deltax 

List of supported devices with 5-pin mini-USB connector - type ODE
navITer OUDIE, WayteQ x950, Vertica V1
Vertica V2, GliderGuider, Sunbrite, Aviar (need 5pin-to-10pin miniUSB converter, which is part of the PNA package)

Supported flight recorders

Standard Logger connectors
RJ-45 - ERIXX, FLARM, new type of Volkslogger, EWmicrorecorder (needs special cable)
RJ-12 - Colibri, LX20-2000 and similar
Binder 711 - old Volkslogger with circular connector
DSUB-9 - LX160, LX7000, old type of LX20 and similar
! NEW ! miniUSB - LX Colibri2, LXnav Nano

Kabel_USB_RS232

PDA_power_topol...

Powersupply01

Powersupply02

Powersupply03

Powersupply04

Powersupply05

Powersupply06

Powersupply07

Powersupply10