| One Man Rigging System |
 |
 |
 |
|
Technical specification: Wing holder: Glass reinforced plastics with red gelcoat, covered with 10mm black adhesive Neoprene foam. 4 main bolt locations for different adjumsment of center of gravity position. Clever universal shape both for thick and thin airfoils or not universal flat profile shape for the most modern types of gliders. Removable securing arm adjustable in two axis with spring-knobs. NEW - special non-universal wing holders for Arcus doubleseater and modern flapped singleseaters (Ventus 1/2, ASW-27, ASG-29, ASH-26/30/31, JS-1, Nimbus 3/4, Quintus, Antares, Shark) available on stock from February 2012! For those pilots, who want to have fully universal One man rigging system for club use or sharing with friends, the older universal wing holders are also on stock and fully compatible with above named gliders, only with aesthetic limitations ( small gap between wing and holder etc.). Body: anodized aluminium profiles, telescopic design, 400 or 500N inbuilt gas spring for fast, easy and stepless heigth adjustment, 300mm run (360mm doubleseater, 240mm microlight version). Axle and wheels: removable axle, sliding to sides for 8cm each side (15cm doubleseater version), with blocking screw. Tube tyre wheels 260mm diameter, removable. Finish: fibreglass parts polyester gelcoat, steel parts galvanized, aluminium parts anodized - no black hands, top finish. Dimensions: very easily foldable for transport in trailer, folded only 85x50x18cm, weight app. 14kg (95x50x20cm, 16kg doubleseater version), please have a look at the pictures below. Use: height adjustable from 70 to 100cm (80 to 115cm dobleseater, 70-94cm microlight version), stepless adjustable, enough for 99%modern gliders, also for uneven surface. Wing chord lenght 68-86cm (82-105cm), relative thickness 12-19%, useful for gliders from Libelle up to ASW-22 or common sport twoseaters (Janus, DuoDiscus, DG-1000). Use on a grass is no problem. Parameters and compatibility, read more about OMRS here. Custom made special One man rigging systems for glider Arcus M and motorglider Grob 109B here. Short movie of the use of the One Man Rigging System in Download section here .
Photos are of the prototype without finish on metal parts, glider Discus CS.
 KKS01  KKS02  KKS03  KKS04  KKS05  KKS06  KKS07  KKS08  KKS09  KKS10  KKS11  KKS12  KKS13  KKS14  KKS15  KKS16  KKS17  KKS18  KKS19  KKS20  KKS21  KKS22  KKS23  KKS24  KKS25  KKS26  KKS27  KKS28  KKS29  KKS30  KKS31  KKS32  KKS33  KKS34  KKS35  KKS36  KKS37  KKS38  KKS39  KKS40  KKS41  KKS42  KKS43  KKS44  KKS45  KKS46  KKS47  KKS48  KKS49  KKS50  KKS51 |
The IMI-One Man Rigging System was succesfully tested at the beginning of 2008. Many many units were delivered to the customers from whole world and for many different types of gliders since that time. It is high rated especially for its simple and light design, simple use and also small transport dimensions. We offer several combinations to be able to equip different kinds of glider types. Combination of four different wing holders and three bodies can be used, so the device is useful for almost all glider types, including some of the microlight and historical gliders.