| Wing Wheel |
 |
 |
 |
|
There are no translations available.
The wing holder attaches at the wing from the leading edge side after undoing of the closing lock. After the proper locating at the wing fasten the closing locks, the holder will pull together. Drive slow and carefully when towing the glider (max 10kmph, 7mph)! The wing wheel should be adjusted for some types of gliders before first use. The wing holder chord lenght and thickness can be changed after your request between 48 - 60cm deep and 12 - 19% thickness. Also the heigh of the fork is adjustable between 75-90cm. This wing wheel is really universal!
The packing contains also a set of bolts of different lenghts and rubber spacers for easy adjustment of the wing holder.  Wing_wheel_01  Wing_wheel_02  Wing_wheel_03  Wing_wheel_04  Wing_wheel_05  Wing_wheel_06  Wing_wheel_07  Wing_wheel_08  Wing_wheel_09  Wing_wheel_10  Wing_wheel_11  Wing_wheel_12  Wing_wheel_13  Wing_wheel_14  Wing_wheel_15
|
The Wing wheel consists of adjustable wing holder compound of three fiberglass parts connected together by steel band and from aluminium swinging fork with fiberglass spring and 16 inch wheel. The fork with the spring provides the suspension and restrains shocks from the ground. All three fiberglass parts of the wing holder are covered with smooth black adhesive foam and are painted with polyester gelcoat ensuring long operating lifetime. All steel parts are zinc galvanized and aluminium parts anodized to ensure good anticorrosive protection.
You can fold the wing wheel for transport easily. Loosen the plastic nut, unhook the fibre-glass spring, tilt down the fork with wheel, enjoy the small dimensions.